PIO-DIM - Module - digital inputs
PIO-DIM
Module - digital inputs
Description
Module - digital inputs
Description
These modules are intended for use with BMS controllers to expand their input capacity by multiplexing four or six digital signals, or 4 or 6 x 24Vac/dc inputs into a single analogue controller unit. Each combination of input states corresponds to an analogue value from the IO-DIM4 and IO-DIM6 which can be decoded into four or six digital status bits.
Features
- Fault finding LED indication
- Auto-calibration of the output
- Input status indication
- Input status simulation
- Expands controller input capacity
- Fault finding LED indication
- Auto-calibration of the output
- Input status indication
- Input status simulation
- Expands controller input capacity
Specifications
Specification |
||
| Inputs: | VFC, 24Vac or 24Vdc | |
| Outputs: | 0-10Vcc into 2kΩ impedance | |
| 4 a 20 mA into 500Ω máx. | ||
| Power supply: | 24Vac ± 15% @ 50Hz | |
| 24Vdc 15% - 6% | ||
| Current: | 35mA máx. voltage output mode | |
| 55mA máx. current output mode | ||
| LED indication: | Supply OK, supply voltage low, supply voltage high, current output (4-20 mA output only) | |
| Ambient range: | Temperature -10 to +50 °C | |
| RH 0 to 80% non-condensing | ||
| Dimensions: | DIM4: 75 x 55 x 42 mm | |
| DIM6: 75 x 75 x 42 mm | ||
| Weight: | DIM4: 80g | |
| DIM6: 100g | ||
Models & Accessories
| CODE | DESCRIPTION |
| PIO-DIM4 | Digital Input Multiplexer 4xVFC 0-10Vdc |
| PIO-DIM6 | Digital Input Multiplexer 6 x VFC |
